发布于 2014-12-30 02:28:24 | 1588 次阅读 | 评论: 0 | 来源: PHPERZ
这里有新鲜出炉的Docker从入门到实践，程序狗速度看过来！
Docker 开源应用容器引擎
Docker 是一个开源的应用容器引擎，让开发者可以打包他们的应用以及依赖包到一个可移植的容器中，然后发布到任何流行的 Linux 机器上，也可以实现虚拟化。
本文为大家讲解的是如何在Ubuntu下安装Docker的方法，感兴趣的同学参考下。
Docker 是一个开源的应用容器引擎，让开发者可以打包他们的应用以及依赖包到一个可移植的容器中，然后发布到任何流行的 Linux 机器上，也可以实现虚拟化。
Docker 支持以下版本的 Ubuntu:
参考 Docker and UFW, 如果你计划使用ufw可参考 UFW (Uncomplicated Firewall)
Ubuntu Trusty comes with a 3.13.0 Linux kernel, and a docker.io package which installs Docker 1.0.1 and all its prerequisites from Ubuntu's repository.
注: Ubuntu (and Debian) contain a much older KDE3/GNOME2 package called
docker, so the Ubuntu-maintained package and executable are nameddocker.io.
更新ubuntu软件包库，并安装docker.io:
$ sudo apt-get update
$ sudo apt-get install docker.io
Then, to enable tab-completion of Docker commands in BASH, either restart BASH or:
$ source /etc/bash_completion.d/docker.io
Note: Since the Ubuntu package is quite dated at this point, you may want to use the following section to install the most recent release of Docker. If you install the Docker version, you do not need to install
docker.iofrom Ubuntu.
If you'd like to try the latest version of Docker:
First, check that your APT system can deal with https URLs: the file /usr/lib/apt/methods/https should exist. If it doesn't, you need to install the package apt-transport-https.
[ -e /usr/lib/apt/methods/https ] || {
apt-get update
apt-get install apt-transport-https
}
Then, add the Docker repository key to your local keychain.
$ sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys 36A1D7869245C8950F966E92D8576A8BA88D21E9
Add the Docker repository to your apt sources list, update and install the lxc-docker package.
You may receive a warning that the package isn't trusted. Answer yes to continue installation.
$ sudo sh -c "echo deb https://get.docker.com/ubuntu docker main\
> /etc/apt/sources.list.d/docker.list"
$ sudo apt-get update
$ sudo apt-get install lxc-docker
Note:
There is also a simple
curlscript available to help with this process.$ curl -sSL https://get.docker.com/ubuntu/ | sudo sh
To verify that everything has worked as expected:
$ sudo docker run -i -t ubuntu /bin/bash
Which should download the ubuntu image, and then start bash in a container.
This installation path should work at all times.
Linux kernel 3.8
Due to a bug in LXC, Docker works best on the 3.8 kernel. Precise comes with a 3.2 kernel, so we need to upgrade it. The kernel you'll install when following these steps comes with AUFS built in. We also include the generic headers to enable packages that depend on them, like ZFS and the VirtualBox guest additions. If you didn't install the headers for your "precise" kernel, then you can skip these headers for the "raring" kernel. But it is safer to include them if you're not sure.
Please read the installation instructions for backported kernels at Ubuntu.org to understand why you also need to install the Xorg packages when running Docker on a machine with a graphical environment like Unity. LTS Enablement Stack refer to note 5 under each version.
# install the backported kernel
$ sudo apt-get update
$ sudo apt-get install linux-image-generic-lts-raring linux-headers-generic-lts-raring
# install the backported kernel and xorg if using Unity/Xorg
$ sudo apt-get install --install-recommends linux-generic-lts-raring xserver-xorg-lts-raring libgl1-mesa-glx-lts-raring
# reboot
$ sudo reboot
Warning: These instructions have changed for 0.6. If you are upgrading from an earlier version, you will need to follow them again.
Docker is available as a Debian package, which makes installation easy. See the Mirrors section below if you are not in the United States. Other sources of the Debian packages may be faster for you to install.
First, check that your APT system can deal with https URLs: the file /usr/lib/apt/methods/https should exist. If it doesn't, you need to install the package apt-transport-https.
[ -e /usr/lib/apt/methods/https ] || {
apt-get update
apt-get install apt-transport-https
}
Then, add the Docker repository key to your local keychain.
$ sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys 36A1D7869245C8950F966E92D8576A8BA88D21E9
Add the Docker repository to your apt sources list, update and install the lxc-docker package.
You may receive a warning that the package isn't trusted. Answer yes to continue installation.
$ sudo sh -c "echo deb https://get.docker.com/ubuntu docker main\
> /etc/apt/sources.list.d/docker.list"
$ sudo apt-get update
$ sudo apt-get install lxc-docker
Note:
There is also a simple
curlscript available to help with this process.$ curl -sSL https://get.docker.com/ubuntu/ | sudo sh
Now verify that the installation has worked by downloading the ubuntu image and launching a container.
$ sudo docker run -i -t ubuntu /bin/bash
Type exit to exit
Done!, continue with the User Guide.
These instructions cover both Ubuntu Raring 13.04 and Saucy 13.10.
Optional AUFS filesystem support
Ubuntu Raring already comes with the 3.8 kernel, so we don't need to install it. However, not all systems have AUFS filesystem support enabled. AUFS support is optional as of version 0.7, but it's still available as a driver and we recommend using it if you can.
To make sure AUFS is installed, run the following commands:
$ sudo apt-get update
$ sudo apt-get install linux-image-extra-`uname -r`
Docker is available as a Debian package, which makes installation easy.
Warning: Please note that these instructions have changed for 0.6. If you are upgrading from an earlier version, you will need to follow them again.
First add the Docker repository key to your local keychain.
$ sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys 36A1D7869245C8950F966E92D8576A8BA88D21E9
Add the Docker repository to your apt sources list, update and install the lxc-docker package.
$ sudo sh -c "echo deb http://get.docker.com/ubuntu docker main\
> /etc/apt/sources.list.d/docker.list"
$ sudo apt-get update
$ sudo apt-get install lxc-docker
Now verify that the installation has worked by downloading the ubuntu image and launching a container.
$ sudo docker run -i -t ubuntu /bin/bash
Type exit to exit
Done!, now continue with the User Guide.
To install the latest version of Docker, use the standard apt-get method:
# update your sources list
$ sudo apt-get update
# install the latest
$ sudo apt-get install lxc-docker
The docker daemon always runs as the root user, and since Docker version 0.5.2, the docker daemon binds to a Unix socket instead of a TCP port. By default that Unix socket is owned by the user root, and so, by default, you can access it with sudo.
Starting in version 0.5.3, if you (or your Docker installer) create a Unix group called docker and add users to it, then the docker daemon will make the ownership of the Unix socket read/writable by the docker group when the daemon starts. The docker daemon must always run as the root user, but if you run the docker client as a user in the docker group then you don't need to add sudo to all the client commands. From Docker 0.9.0 you can use the -G flag to specify an alternative group.
Warning: The
dockergroup (or the group specified with the-Gflag) isroot-equivalent; see Docker Daemon Attack Surface for details.
Example:
# Add the docker group if it doesn't already exist.
$ sudo groupadd docker
# Add the connected user "${USER}" to the docker group.
# Change the user name to match your preferred user.
# You may have to logout and log back in again for
# this to take effect.
$ sudo gpasswd -a ${USER} docker
# Restart the Docker daemon.
# If you are in Ubuntu 14.04, use docker.io instead of docker
$ sudo service docker restart
If you want to enable memory and swap accounting, you must add the following command-line parameters to your kernel:
cgroup_enable=memory swapaccount=1
On systems using GRUB (which is the default for Ubuntu), you can add those parameters by editing /etc/default/grub and extending GRUB_CMDLINE_LINUX. Look for the following line:
GRUB_CMDLINE_LINUX=""
And replace it by the following one:
GRUB_CMDLINE_LINUX="cgroup_enable=memory swapaccount=1"
Then run sudo update-grub, and reboot.
These parameters will help you get rid of the following warnings:
WARNING: Your kernel does not support cgroup swap limit.
WARNING: Your kernel does not support swap limit capabilities. Limitation discarded.
On Linux Mint, the cgroup-lite and apparmor packages are not installed by default. Before Docker will work correctly, you will need to install this via:
$ sudo apt-get update && sudo apt-get install cgroup-lite apparmor
Docker uses a bridge to manage container networking. By default, UFW drops all forwarding traffic. As a result you will need to enable UFW forwarding:
$ sudo nano /etc/default/ufw
# Change:
# DEFAULT_FORWARD_POLICY="DROP"
# to
DEFAULT_FORWARD_POLICY="ACCEPT"
Then reload UFW:
$ sudo ufw reload
UFW's default set of rules denies all incoming traffic. If you want to be able to reach your containers from another host then you should allow incoming connections on the Docker port (default 2375):
$ sudo ufw allow 2375/tcp
Systems which are running Ubuntu or an Ubuntu derivative on the desktop will use 127.0.0.1 as the default nameserver in /etc/resolv.conf. NetworkManager sets up dnsmasq to use the real DNS servers of the connection and sets up nameserver 127.0.0.1 in /etc/resolv.conf.
When starting containers on these desktop machines, users will see a warning:
WARNING: Local (127.0.0.1) DNS resolver found in resolv.conf and containers can't use it. Using default external servers : [8.8.8.8 8.8.4.4]
This warning is shown because the containers can't use the local DNS nameserver and Docker will default to using an external nameserver.
This can be worked around by specifying a DNS server to be used by the Docker daemon for the containers:
$ sudo nano /etc/default/docker
---
# Add:
DOCKER_OPTS="--dns 8.8.8.8"
# 8.8.8.8 could be replaced with a local DNS server, such as 192.168.1.1
# multiple DNS servers can be specified: --dns 8.8.8.8 --dns 192.168.1.1
The Docker daemon has to be restarted:
$ sudo restart docker
Warning: If you're doing this on a laptop which connects to various networks, make sure to choose a public DNS server.
An alternative solution involves disabling dnsmasq in NetworkManager by following these steps:
$ sudo nano /etc/NetworkManager/NetworkManager.conf
----
# Change:
dns=dnsmasq
# to
#dns=dnsmasq
NetworkManager and Docker need to be restarted afterwards:
$ sudo restart network-manager
$ sudo restart docker
Warning: This might make DNS resolution slower on some networks.
You should ping get.docker.com and compare the latency to the following mirrors, and pick whichever one is best for you.
Yandex in Russia is mirroring the Docker Debian packages, updating every 6 hours. Substitute http://mirror.yandex.ru/mirrors/docker/ for http://get.docker.com/ubuntu in the instructions above. For example:
$ sudo sh -c "echo deb http://mirror.yandex.ru/mirrors/docker/ docker main\
> /etc/apt/sources.list.d/docker.list"
$ sudo apt-get update
$ sudo apt-get install lxc-docker