发布于 2017-11-08 12:43:08 | 174 次阅读 | 评论: 0 | 来源: 网友投递

这里有新鲜出炉的精品教程,程序狗速度看过来!

Spring Framework 开源j2ee框架

Spring是什么呢?首先它是一个开源的项目,而且目前非常活跃;它是一个基于IOC和AOP的构架多层j2ee系统的框架,但它不强迫你必须在每一层 中必须使用Spring,因为它模块化的很好,允许你根据自己的需要选择使用它的某一个模块;它实现了很优雅的MVC,对不同的数据访问技术提供了统一的接口,采用IOC使得可以很容易的实现bean的装配,提供了简洁的AOP并据此实现Transcation Managment,等等


本篇文章主要介绍了详解Spring Aop实例之xml配置,使用xml可以对aop进行集中配置,具有一定的参考价值,感兴趣的小伙伴们可以参考一下

AOP的配置方式有2种方式:xml配置和AspectJ注解方式。今天我们就来实践一下xml配置方式。

我采用的jdk代理,所以首先将接口和实现类代码附上


package com.tgb.aop; 
public interface UserManager { 
 
  public String findUserById(int userId); 
} 
 
 
package com.tgb.aop; 
 
public class UserManagerImpl implements UserManager { 
 
  public String findUserById(int userId) { 
    System.out.println("---------UserManagerImpl.findUserById()--------"); 
    if (userId <= 0) { 
      throw new IllegalArgumentException("该用户不存在!");  
    } 
    return "张三"; 
  } 
}

单独写一个Advice通知类进行测试。这个通知类可以换成安全性检测、日志管理等等。


package com.tgb.aop; 
import org.aspectj.lang.JoinPoint; 
import org.aspectj.lang.ProceedingJoinPoint; 
 /** 
 * Advice通知类 
 * 测试after,before,around,throwing,returning Advice. 
 * @author Admin 
 * 
 */ 
public class XMLAdvice { 
 
  /** 
   * 在核心业务执行前执行,不能阻止核心业务的调用。 
   * @param joinPoint 
   */ 
  private void doBefore(JoinPoint joinPoint) { 
    System.out.println("-----doBefore().invoke-----"); 
    System.out.println(" 此处意在执行核心业务逻辑前,做一些安全性的判断等等"); 
    System.out.println(" 可通过joinPoint来获取所需要的内容"); 
    System.out.println("-----End of doBefore()------"); 
  } 
   
  /** 
   * 手动控制调用核心业务逻辑,以及调用前和调用后的处理, 
   * 
   * 注意:当核心业务抛异常后,立即退出,转向After Advice 
   * 执行完毕After Advice,再转到Throwing Advice 
   * @param pjp 
   * @return 
   * @throws Throwable 
   */ 
  private Object doAround(ProceedingJoinPoint pjp) throws Throwable { 
    System.out.println("-----doAround().invoke-----"); 
    System.out.println(" 此处可以做类似于Before Advice的事情"); 
     
    //调用核心逻辑 
    Object retVal = pjp.proceed(); 
     
    System.out.println(" 此处可以做类似于After Advice的事情"); 
    System.out.println("-----End of doAround()------"); 
    return retVal; 
  } 
 
  /** 
   * 核心业务逻辑退出后(包括正常执行结束和异常退出),执行此Advice 
   * @param joinPoint 
   */ 
  private void doAfter(JoinPoint joinPoint) { 
    System.out.println("-----doAfter().invoke-----"); 
    System.out.println(" 此处意在执行核心业务逻辑之后,做一些日志记录操作等等"); 
    System.out.println(" 可通过joinPoint来获取所需要的内容"); 
    System.out.println("-----End of doAfter()------"); 
  } 
   
  /** 
   * 核心业务逻辑调用正常退出后,不管是否有返回值,正常退出后,均执行此Advice 
   * @param joinPoint 
   */ 
  private void doReturn(JoinPoint joinPoint) { 
    System.out.println("-----doReturn().invoke-----"); 
    System.out.println(" 此处可以对返回值做进一步处理"); 
    System.out.println(" 可通过joinPoint来获取所需要的内容"); 
    System.out.println("-----End of doReturn()------"); 
  } 
   
  /** 
   * 核心业务逻辑调用异常退出后,执行此Advice,处理错误信息 
   * @param joinPoint 
   * @param ex 
   */ 
  private void doThrowing(JoinPoint joinPoint,Throwable ex) { 
    System.out.println("-----doThrowing().invoke-----"); 
    System.out.println(" 错误信息:"+ex.getMessage()); 
    System.out.println(" 此处意在执行核心业务逻辑出错时,捕获异常,并可做一些日志记录操作等等"); 
    System.out.println(" 可通过joinPoint来获取所需要的内容"); 
    System.out.println("-----End of doThrowing()------"); 
  } 
} 

只有Advice还不行,还需要在application-config.xml中进行配置:


<?xml version="1.0" encoding="UTF-8"?>  
<beans xmlns="http://www.springframework.org/schema/beans" 
     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" 
     xmlns:aop="http://www.springframework.org/schema/aop" 
     xmlns:tx="http://www.springframework.org/schema/tx" 
     xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-2.0.xsd 
      http://www.springframework.org/schema/aop http://www.springframework.org/schema/aop/spring-aop-2.0.xsd 
      http://www.springframework.org/schema/tx http://www.springframework.org/schema/tx/spring-tx-2.0.xsd"> 
        
   
  <bean id="userManager" class="com.tgb.aop.UserManagerImpl"/> 
   
  <!--<bean id="aspcejHandler" class="com.tgb.aop.AspceJAdvice"/>--> 
  <bean id="xmlHandler" class="com.tgb.aop.XMLAdvice" /> 
  <aop:config> 
    <aop:aspect id="aspect" ref="xmlHandler"> 
      <aop:pointcut id="pointUserMgr" expression="execution(* com.tgb.aop.*.find*(..))"/>        
      <aop:before method="doBefore" pointcut-ref="pointUserMgr"/> 
      <aop:after method="doAfter" pointcut-ref="pointUserMgr"/> 
      <aop:around method="doAround" pointcut-ref="pointUserMgr"/> 
      <aop:after-returning method="doReturn" pointcut-ref="pointUserMgr"/> 
      <aop:after-throwing method="doThrowing" throwing="ex" pointcut-ref="pointUserMgr"/>        
    </aop:aspect> 
  </aop:config> 
</beans> 

编一个客户端类进行测试一下:


package com.tgb.aop;  
import org.springframework.beans.factory.BeanFactory; 
import org.springframework.context.support.ClassPathXmlApplicationContext; 
 
public class Client { 
 
  public static void main(String[] args) { 
    BeanFactory factory = new ClassPathXmlApplicationContext("applicationContext.xml"); 
    UserManager userManager = (UserManager)factory.getBean("userManager"); 
     
    //可以查找张三 
    userManager.findUserById(1); 
     
    System.out.println("=====我==是==分==割==线====="); 
 
    try { 
      // 查不到数据,会抛异常,异常会被AfterThrowingAdvice捕获 
      userManager.findUserById(0); 
    } catch (IllegalArgumentException e) { 
    } 
  } 
} 

结果如图:

值得注意的是Around与Before和After的执行顺序。3者的执行顺序取决于在xml中的配置顺序。图中标记了3块,分别对应Before,Around,After。其中②中包含有③。这是因为aop:after配置到了aop:around的前面,如果2者调换一下位置,这三块就会分开独立显示。如果配置顺序是aop:after  -> aop:around ->aop:before,那么①和③都会包含在②中。这种情况的产生是由于Around的特殊性,它可以做类似于Before和After的操作。当安全性的判断不通过时,可以阻止核心业务逻辑的调用,这是Before做不到的。

  

 

使用xml可以对aop进行集中配置。很方便而简单。可以对所有的aop进行配置,当然也可以分开到单独的xml中进行配置。当需求变动时,不用修改代码,只要重新配置aop,就可以完成修改操作。

以上就是本文的全部内容,希望对大家的学习有所帮助,也希望大家多多支持PHPERZ。



最新网友评论  共有(0)条评论 发布评论 返回顶部

Copyright © 2007-2017 PHPERZ.COM All Rights Reserved   冀ICP备14009818号  版权声明  广告服务